MULCHING EQUIPMENT
GLIDER

-
3 points linkage on massive bars zinc.
-
Mechanical or hydraulic displacement by screw.
-
Gearbox with freewheel.
-
Back roller of 150 mm of diameter with scraper.
-
A jagged line of counter hammers.

SUPER FOREST

-
Hydraulic rear door with two cylinders
-
Side transmission by toothed belts C-type in model TSF180
-
Double side transmission by toothed belts C-type in models TSF200 and TSF220
-
Special hammers that turn 360º
-
Frontal and back protection with chains

MINI FOREST

-
Hammer rotor adapted using an electronic method
-
Fixed centered linkage CAT II
-
Extremely robust gearbox with freewheel
-
Very hard chassis anti-wear
-
2 rows of counter hammers

THUNDER

-
Mechanical or hydraulic displacement over a zinc-coated solid bar.
-
Gearbox with free wheel included.
-
Helicoidal hammer rotor.
-
Back roller 220 mm diameter with scrapper.
-
Support with protection for back roller bearings.
-
A double row of counter hammers (one of jagged profile and other in "U" shape)



PERFECT
-
Mechanical or hydraulic displacement over a zinc-coated solid bar.
-
Gearbox with freewheel included.
-
Helicoidal hammer rotor.
-
Automatic belts are tensile.
-
Back roller 220 mm diameter with scrapper.
-
Support with protection for back roller bearings.

MAXUM

-
Hydraulic displacement over a zinc-coated solid bar.
-
Gearbox with freewheel.
-
Rear roller 170 mm very reinforced.
-
Skids
-
A double row of counter hammers.
-
Reinforced iron protective bands and chains.
-
Adjustable rear holding pin

PANTHER

-
Fixed and centered linkage.
-
Gearbox with freewheel.
-
Chassis and back door very reinforced.
-
Multiaggressive rotor of high speed.
-
Reinforced rotating wheels with height adjustment or rear roller Ø170 mm
-
A double row of right profiles

T- MAX

-
Centered coupling
-
Mobile hooking for front and back versions
-
Gearbox with freewheel
-
Fixed back wheels in an axis
-
2 jagged profiles of counter hammers made in HARDOX
-
Back girders of discharge very reinforced
-
Double hydraulic pick-up feeder in material anti-wear
-
Lid of belts only in one side (belts and feeder in the right side)
-
The rotor of hammers and supports are very reinforced

SPRING

-
Hydraulic side shift
-
Reinforced rotor of grad diameter
-
Reversible gearbox with double exit and double freewheel
-
Back roller with double bearing Ø220 mm
-
Front chains protection
-
Lateral skids
-
Back door with rubber band protection

FASTER

-
Fixed and centered linkage.
-
Gearbox with freewheel up to model TFS280.
-
Model TFS280DT and TFS320 with PTO shaft with freewheel.
-
Control of height with wheels or back roller Ø220 cm
-
A double row of counter hammers (one jagged profile and one in “U” shape)
-
Mechanic backdoor.

MINI KING (TMK)

-
- Gearbox with freewheel
-
Back roller of 140 mm of diameter with scraper
-
Set of lateral skids
-
Protective bands in iron
-
Inclination cylinder with adjustment of flow
-
Base support
-
Track pins and Cardan joint

KING (TKG)

-
Gearbox with freewheel
-
Back roller of 140 mm of diameter with scraper
-
Supports of hammers very reinforced
-
Skids set longer with bearing protection
-
Mechanic back door for inspection with a new system of wider opening
-
Protective bands in iron

KING TOP (TKT)

-
Gearbox with freewheel
-
Outside reinforced gearbox and gearbox support ready for high power tractors
-
Extremely reinforced hitch double positioning
-
170 mm back roller with scrapper
-
Skids with protective flap rear roller bracket
-
Hammer rotor and bearings very reinforced
-
Rear door
-
Reinforced iron protective bands
